[Shorewall-users] Firewall Requirement
modi_bhavin at hotpop.com
Sat Dec 20 13:45:20 PST 2003
I just wanted to make sure that I can use shorewall for my network.
After going through the documentation I know I can do a lot with shorewall.
----- Original Message -----
From: "Tom Eastep" <teastep at shorewall.net>
To: "Mailing List for Experienced Shorewall Users"
<shorewall-users at lists.shorewall.net>
Sent: Saturday, December 20, 2003 12:20 PM
Subject: Re: [Shorewall-users] Firewall Requirement
> On Sat, 2003-12-20 at 09:33, Bhavin Modi wrote:
> > I think I presented the network in a wrong manner.
> > Here is the correction.
> > Router(/30) < -- > Firewall external interface (/30)
> > |
> > Firewall DMZ interface (/24) <----> Public
> > (/24)
> > |
> > Firewall pvt. network interface (rfc1918)
> > Private Network (not used as HTTP filtering causes extra load on
> > The gateway for firewall is the router IP address.
> > The gateway for public network is firewall DMZ interface address.
> To answer your first question, Yes Shorewall can be used in this
> You are going to have to do some reading though so you can ask more
> specific questions about configuration; "How do I configure the above"
> is asking us to do your job for you. I suggest that you start at
> There are other users on the list that run high-volume Shorewall
> configurations and hopefully they will be able to give you some advice
> about the hardware requirements.
> Tom Eastep \ Nothing is foolproof to a sufficiently talented fool
> Shoreline, \ http://shorewall.net
> Washington USA \ teastep at shorewall.net
> Shorewall-users mailing list
> Post: Shorewall-users at lists.shorewall.net
> Support: http://www.shorewall.net/support.htm
> FAQ: http://www.shorewall.net/FAQ.htm
More information about the Shorewall-users