[Shorewall-newbies] One range and 2 network adapters
teastep at shorewall.net
Fri Feb 13 14:52:00 PST 2004
On Friday 13 February 2004 11:40 am, mollo wrote:
> Hello List,
> This is surely not a Shorewall issue, but permit I post my problem.
> Assume my ISP gave me 32 Ips : 188.8.131.52/27.
> I've _not_ other IP's, like a DSL router in another network!
> Address: 184.108.40.206
> Netmask: 255.255.255.224 = 27
> Wildcard: 0.0.0.31
> Network: 220.127.116.11/27 (Class C)
> Broadcast: 18.104.22.168
> HostMin: 22.214.171.124
> HostMax: 126.96.36.199
> Hosts/Net: 30
> I would setup a 3 card Firewall :
> eth0: 188.8.131.52 (net)
> eth1: 184.108.40.206 (dmz)
> eth2: 192.168.x.x (loc)
> What's the way to have a correct routing between eth0 and eth1 without
> splitting in subranges ? If there is a solution.
> If I define my card like follow :
> eth0: 220.127.116.11/27 gateway .97
No -- 192.168.1.98/32 gateway .97 and add a host route to .97.
> eth1: 18.104.22.168/27 gateway .98
Tom Eastep \ Nothing is foolproof to a sufficiently talented fool
Shoreline, \ http://shorewall.net
Washington USA \ teastep at shorewall.net
More information about the Shorewall-newbies