[Shorewall-newbies] Shorewall 1.4.8 Debian setup problems

Michel D'Astous mdastous at cqmail.net
Sat Dec 13 13:30:35 PST 2003


Thanks a lot ,

Everythings is working now.

Quoting Alex Martin <alex at rettc.com>:
>
> > At this point point ip addr show:
> > 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
> >     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> >     inet 127.0.0.1/8 scope host lo
> > 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
> >     link/ether 00:01:02:c8:72:9e brd ff:ff:ff:ff:ff:ff
> >     inet 66.130.132.35/24 brd 255.255.255.255 scope global eth0
> > 3: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop
> >     link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
> > 4: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
> >     link/ether 00:50:fc:c3:5e:b3 brd ff:ff:ff:ff:ff:ff
> > 5: tunl0 at NONE: <NOARP> mtu 1480 qdisc noop
> >     link/ipip 0.0.0.0 brd 0.0.0.0
> > 6: gre0 at NONE: <NOARP> mtu 1476 qdisc noop
> >     link/gre 0.0.0.0 brd 0.0.0.0
>
> Notice that eth1 has no ip address. You must give it an address for
> shorewall to work.
>
> -Alex
>
>


--
Michel D'Astous
mdastous at cqmail.net


More information about the Shorewall-newbies mailing list